Configure PMM Branding page

By using the PMM Branding page, you can customize the look of the PMM Portal or/and the PMM digest messages.

• If you provide your corporate logo, it will be displayed at the top of the PMM digest messages.

• You can specify the tab color as well as the tab-text color used in the PMM Portal. You can set a different color to a tab that is selected.

From version 5.6.0 onwards, a corporate logo you set is no longer displayed in the PMM Portal. The logo, however, is still displayed in the PMM digest messages. This is solely cosmetic and does not affect any functionalities.

Corporate Logo

You can change the corporate logo displayed at the top-left corner of the PMM digest messages.

1. Navigate to System > PMM Settings > Branding. The PMM Branding page is displayed.

2. In the Corporate Logo panel, click Click here to change these settings.

3. Click Choose file and browse to the location of a suitable image. An image you provide must be in JPG, GIF, PNG or BMP format, and the image size must not exceed 1 MB.

   Select the image file and click Open.

   Although the Gateway scales any images to fit the available area, the ideal relative dimensions for the images are approximately 10 units wide by 6.8 high. Ensure that your selected image is as close to this dimension as possible, so it will not appear too distorted in the PMM digest messages.

4. Click Save.

Portal Colors

You can change the color of the tab and its text used in the PMM Portal.

1. Navigate to System > PMM Settings > Branding. The PMM Branding page is displayed.

2. In the Portal Colors panel, click Click here to change these settings.

3. Select the The color scheme will be modified to use the following colors check box and enter a hex color value for:

   • Tab Background (Selected): a color of the tab when it is selected

   • Tab Background (Normal): a color of the tab when it is not selected

   • Tab Text (Selected): a color of the tab text when that tab is selected

   • Tab Text (Normal): a color of the tab text when that tab is not selected

   As you enter the values, a preview is displayed in the panel.

4. Click Save.

If you change any configuration or policy settings, you must Apply Configuration for the new settings to take effect. You can do this either from the Changes Made panel, or System > Configuration > Apply Configuration. See Apply new configuration for more information.If you use Peer Gateways (i.e. when multiple Gateways are peered), any configuration changes from a local Gateway can then be applied to all the peers at the same time. See Configure Peer Gateways for more information.