Amazon RDS - Reboot Instance

Declaration

<AMAWSRDS ACTIVITY="reboot_instance" INSTANCEID="text" 
RESULTDATASET="text" ACCESSKEY="text" SECRETKEY="text (encrypted)"
SERVICEURL="text" PROXYHOST="text" 
USERAGENT="text" PROXYPORT="number" PROXYUSER="text" 
PROXYPWD="text (encrypted)" MAXERRORRETRY="number" 
SIGNMETHOD="text" SIGNVERSION="number" />

Description: Reboots an RDS instance.

IMPORTANT: RDS activities are performed using Amazon's Relational Database Service engine, therefore, administering Amazon RDS requires a valid Access Key ID and Secret Access Key.

Practical Usage

Mainly used to reboot an instance after making database parameter group changes.

Connection Parameters

Property

Type

Required

Default

Markup

Description

Connection

 

 

 

 

Indicates where Amazon Web Service user credentials and preferences should originate from. This is a design mode parameter used only during task construction and configuration, thus, comprises no markup. The available options are:

  • Host (default) - Specifies that user credentials and/or advanced preferences are configured individually for this activity. This option is normally chosen if only a single activity is required to complete an operation.

  • Session - Specifies that user credentials and/or advanced preferences are obtained from a pre-configured session created in an earlier step with the use of the RDS - Create session activity. This option is normally chosen if a combination of related activities are required to complete an operation. Linking several activities to a single session eliminates redundancy. Additionally, a single task supports construction and simultaneous execution of multiple sessions, improving efficiency.

Session

Text

Yes if connection is session-based

RDSSession1

SESSION="RDSSession1"

The name of an existing session to attach this activity to. This parameter is active only if the Connection parameter is set to Session. The default session name is 'RDSSession1'.

Access key

Text

Yes if connection is host-based

(Empty)

ACCESSKEY=

"022QF06E7MXBSH9DHM02"

A 20-character alphanumeric string that uniquely identifies the owner of the AWS service account, similar to a username. This key along with a corresponding secret access key forms a secure information set that AWS uses to confirm a valid user's identity. This parameter is active only if the Connection parameter is set to Host.

Secret Access key

Text

Yes if connection is host-based

(Empty)

SECRETKEY=

"kWcrlUX5JEDGM/LtmEENI/

aVmYvHNif5zB+d9+ct"

A 40-character string that serves the role as password to access the AWS service account. This along with an associated access key forms a secure information set that EC2 uses to confirm a valid user's identity. This parameter is active only if the Connection parameter is set to Host.

User agent

Text

No

AutoMate

USERAGENT="AutoMate"

The name of the client or application initiating requests to AWS. The default value is 'AutoMate'. 

Maximum retry on error

Number

No

(Empty)

MAXERRORRETRY="4"

The total amount of times this activity should retry its request to the server before returning an error. Network components can generate errors anytime in the life of a request, thus, implementing retries can increase reliability. 

Service URL

Text

No

(Empty)

SERVICEURL=

"https://rds.eu-west-1.amazonaws.com"

The URL that provides the service endpoint. To make the service call to a different region, you can pass the region-specific endpoint URL. For example, entering  https://rds.us-west-1.amazonaws.com points to US West (Northern California) region. A complete list of EC2 regions, accompanying endpoints and valid protocols can be found below under RDS Endpoints and Regions.

Proxy host

Text

No

(Empty)

PROXYHOST="proxy.host.com"

The host name (e.g., server.domain.com) or IP address (e.g., xxx.xxx.xxx.xxx) of the proxy server to use when connecting to AWS.  

Proxy port

Number

No

(Empty)

PROXYPORT="1028"

The port that should be used to connect to the proxy server.

Proxy username

Text

No

(Empty)

PROXYUSER="username"

The username that should be used to authenticate connection with the proxy server (if required).

Proxy password

Text

No

(Empty)

PROXYPWD="encrypted"

The password that should be used to authenticate connection with the proxy server (if required).

Signature method

Text

No

(Empty)

SIGNMETHOD="HmacSHA256"

The signature method to use for signing the request. This provides a valid hashing algorithm for signature calculation. Valid AWS signature methods are HmacSHA1 and HmacSHA256.

Signature version

Number

No

(Empty)

SIGNVERSION="2"

The signature version for signing the request. Valid AWS signature versions are 2 and 4. The difference with version 4 is that it allows you to sign your message using a key that is derived from your secret access key rather than using the secret access key itself.

Instance Parameters

Property

Type

Required

Default

Markup

Description

Instance Identifier

Text

Yes

(Empty)

INSTANCEID="my-test-1"

A unique name/identifier for the RDS instance. This identifier specifies a particular DB Instance when interacting with the Amazon RDS API and commands. The DB Instance identifier must be unique for that customer in an AWS region. If the name is not in lowercase characters, it will be converted (e.g., my-test-1).Constraints are as follows:

  • Must contain 1 to 63 alphanumeric characters or hyphens.

  • First character must be a letter.

  • May not end with a hyphen or contain two consecutive hyphens.

Create and populate dataset with RDS Instance information

Text

No

(Empty)

RESULTDATASET="myDataset"

The name of the dataset to be created and populated with the RDS Instance information. More information regarding the individual fields this dataset creates can be found below under Datasets.

Description tab - A custom description can be provided on the Description tab to convey additional information or share special notes about a task step.

Error Causes tab - Specify how this step should behave upon the occurrence of an error. (Refer to Task Builder > Error Causes Tab for details.)

On Error tab - Specify what AWE should do if this step encounters an error as defined on the Error Causes tab. (Refer to Task Builder > On Error Tab for details.)

RDS Endpoints and Regions

This table contains a complete list of Amazon Relational Database Service endpoints, along with their corresponding regions and supported protocols.

Endpoint

Region

Protocol

rds.us-east-1.amazonaws.com

US East (Northern Virginia) Region

HTTP and HTTPS

rds.us-west-2.amazonaws.com

US West (Oregon) Region

HTTP and HTTPS

rds.us-west-1.amazonaws.com

US West (Northern California) Region

HTTP and HTTPS

rds.eu-west-1.amazonaws.com

EU (Ireland) Region

HTTP and HTTPS

rds.ap-southeast-1.amazonaws.com

Asia Pacific (Singapore) Region

HTTP and HTTPS

rds.ap-southeast-2.amazonaws.com

Asia Pacific (Sydney) Region

HTTP and HTTPS

rds.ap-northeast-1.amazonaws.com

Asia Pacific (Tokyo) Region

HTTP and HTTPS

rds.sa-east-1.amazonaws.com

South America (Sao Paulo) Region

HTTP and HTTPS

Datasets

A dataset is a multiple column, multiple row container object. This activity creates and populates a dataset containing a specific set of fields. The table below describes these fields (assuming the dataset name assigned was theDataset).

Name

Type

Return Value

theDataset.AllocatedStorage

Number

The size of the RDS Instance in GB that's allocated for storage.

theDataset.AvailabilityZone

Text

The availability zone where the RDS Instance was launched. (Example: us-east-1b)

theDataset.BackupRetentionPeriod

Number

The number of days to retain automated backups initially set for the instance.

theDataset.DBInstanceClass

Text

The compute and memory capacity of the DB Instance. (Example: db.m2.4xlarge)

theDataset.DBInstanceIdentifier

Text

The user-supplied database identifier. This is the unique key that identifies a DB Instance.

theDataset.DBInstanceStatus

Text

The current status of the Instance. (Example: deleted)

theDataset.DBName

Text

The user-defined name of the initial database created when the instance was created.

theDataset.DBParameterGroup

Text

The name of DB Parameter Group applied to the Instance.

theDataset.DBSecurityGroup

Text

The name for the DB Security Group. (Example: mysecuritygroup)

theDataset.EndPointAddress

Text

The address of the RDS Instance. This includes the Instance's name (AWS ID) and EC2 region. (Example: myrds.chxspydgchoo.us-east-1.rds.amazonaws.com)

theDataset.EndPointPort

Number

The RDS Instance's endpoint port.

theDataset.Engine

Text

The name of the database engine (including version) to be used for this DB Instance. Note that currently, Amazon RDS only supports mySQL.

theDataset.InstanceCreateTime

Date

The date when the Instance was initially created, in UTC.

theDataset.LatestRestorableTime

Date

The latest restorable date set for the DB.

theDataset.MasterUsername

Text

The master username for the instance. This is the username used to log onto themySQL database.

theDataset.PreferredBackupWindow

Date

The 2-hour window (GMT timezone) for backups initially set for the Instance. (Example: 03:00-05:00).

theDataset.PreferredMaintenanceWindow

Date

The 4-hour window (GMT timezone) non peak time initially set for the instance used for maintenance purposes (Example: sun:05:00-sun:09:00).)

Example

The sample AML code below can be copied and pasted directly into the Steps panel of the Task Builder.

Description: This session-based task demonstrates some of RDS activities. It creates a database instance and performs some modifications onto the new instance. Thereafter, it creates a snapshot of the newly modified instance then reboots. The last step ends the session.

<AMAWSRDS ACTIVITY="create_session" ACCESSKEY="AKIAJU2LHLMG6BA6BZTA" 
SECRETKEY="AM3m5RnKS1eh50=aME" USERAGENT="AutoMate" 
SESSION="MySession" />
<AMAWSRDS INSTANCEID="myRDSDatabase" 
INSTANCETYPE="db.m1.small" ZONE="us-east-1a" 
MASTPORT="3306" STORAGE="5" PROVIDER="session_based" 
SESSION="MySession" />
<AMAWSRDS ACTIVITY="modify_instance" 
INSTANCEID="myRDSDatabase" INSTANCETYPE="db.m1.large" 
STORAGE="10" APPLYFAST="yes" PROVIDER="session_based" 
SESSION="MySession" />
<AMAWSRDS ACTIVITY="create_snapshot" 
SNAPSHOTID="rdsSnap" INSTANCEID="myRDSDatabase" 
RESULTDATASET="theSnap" PROVIDER="session_based" 
SESSION="MySession" />
<AMAWSRDS ACTIVITY="reboot_instance" 
INSTANCEID="myRDSDatabase" PROVIDER="session_based" 
SESSION="MySession" />
<AMAWSRDS ACTIVITY="end_session" 
SESSION="MySession" />