Selected System Messages
Understanding the MSG ID
Message IDs beginning with the letters 'CP' are Critical Operating System messages. SIEM Agent employs the same message numbering for these messages that is used by IBM. The following illustrates the message numbering of a common Critical Operating System Message:
| Message ID | MSG |
|---|---|
|
CPF1393 |
Subsystem disabled user profile on device |
Below is a compilation of selected System Messages with the shipped criticality and class for each. For more information refer to IBM's message descriptions.
CRITICALITY
The Criticality value is used by remote consoles to determine how to flag an event when it is displayed. The possible values are:
1 - This event will have a *HIGH criticality.
2 - This event will have a *MEDIUM criticality.
3 - This event will have a *LOW criticality.
0 - This event will be a *NOPASS event. SIEM Agent will ignore this event. No record will be sent to an external console.
| MSGID | MSG | CLASS | SEVERITY | CRITICALITY Shipped |
CRITICALITY Powertech Recommendation |
|---|---|---|---|---|---|
|
CPF0907 |
Serious storage condition may exist. Press HELP. |
STG |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPF111C |
System scheduled to power down. |
SYS |
50 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPF111D |
IBM is powering down. |
SYS |
50 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPF1269 |
Program start request received on communications device was rejected with reason codes. |
SYS |
0 |
*NOPASS (0) |
*NOPASS (0) |
|
CPF1393 |
Subsystem disabled user profile on device. |
IDS |
70 |
*LOW (3) |
*MEDIUM (2) |
|
CPF1397 |
Subsystem varied off work station for user. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI0948 |
Mirrored protection is suspended on disk unit. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0949 |
Mirrored protection suspended on disk unit. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0950 |
Storage unit now available. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0953 |
ASP storage threshold reached. |
STG |
90 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0954 |
Storage limit exceeded for ASP. |
STG |
90 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0955 |
System ASP unprotected storage limit exceeded. |
STG |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0964 |
Weak battery condition exists. |
SYS |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0965 |
Failure of battery backup feature in system unit |
SYS |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0966 |
Failure of the battery backup feature in expansion unit. |
SYS |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI0988 |
Mirrored protection resuming on disk unit. |
SYS |
40 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI0989 |
Mirrored protection resumed on disk unit. |
SYS |
40 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI0998 |
Error occurred on disk unit. |
STG |
90 |
*NOPASS (0) |
*HIGH (1) |
|
CPI099C |
Critical storage lower limit reached. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1117 |
Damaged job schedule in library deleted. |
SYS |
60 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI1136 |
Mirrored protection still suspended. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1138 |
Storage overflow recovered for ASP. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI1139 |
Storage overflow recovery failed for ASP. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI1153 |
System password bypass period ended. |
SYS |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1154 |
System password bypass period will end in days. |
SYS |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1159 |
System Unique Identifier will expire with more installs. |
SYS |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1160 |
System Unique Identifier expired or not valid. |
SYS |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1161 |
Unit with device parity protection not fully operational. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1162 |
Unit with device parity protection not fully operational. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1165 |
One or more device parity protected units still not fully operational. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1166 |
Units with device parity protection fully operational. |
STG |
40 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI1167 |
Temporary I/O processor error occurred. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI1168 |
Error occurred on disk unit. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI1169 |
Disk unit not operating. |
STG |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPI2209 |
User profile deleted because it was damaged. |
IDS |
70 |
*MEDIUM (2) |
*MEDIUM (2) |
|
CPI2283 |
QAUDCTL system value changed to *NONE |
SYS |
50 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI2284 |
QAUDCTL system value changed to *NONE |
SYS |
50 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI8A13 |
QDOC library nearing system object limit. |
STG |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI8A14 |
QDOC library has exceeded System object limit. |
STG |
80 |
*NOPASS (0) |
*HIGH (1) |
|
CPI8898 |
An optical system bus failure is detected |
SYS |
60 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI9014 |
Password received from device not valid. |
IDS |
50 |
*LOW (3) |
*MEDIUM (2) |
|
CPI94A0 |
Disk error on device. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI94CE |
A system processor error is detected. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI94CF |
Main Storage card failure is detected. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI94FC |
Disk error on device. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI9490 |
Disk error on device. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI96C0 |
Protected password could not be validated. |
AUD |
50 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPI96C1 |
Sign-on request GDS variable was not correct. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C2 |
User password could not be changed. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C3 |
Message &4 returned on system call. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C4 |
Password not correct for user profile. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C5 |
User &4 does not exist. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C6 |
Return code &4 received on call to CPI-Communications. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPI96C7 |
System failure in APPC sign-on transaction program. |
AUD |
10 |
*NOPASS (0) |
*LOW (3) |
|
CPPEA02 |
*Attention* Contact your hardware service provider now. (Internal analysis of an exception indicates that hardware service is required now.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPPEA04 |
*Attention* Contact your hardware service provider now. (Internal analysis of an exception indicates that hardware redundancy has been lost due to a permanent failure.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPPEA05 |
*Attention* Contact your hardware service provider now. (Internal analysis of an exception indicates data protection facilities have been lost due to a permanent failure.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPPEA12 |
*Attention* Contact your hardware service provider now. (Internal analysis of an exception indicates that an I/O card is operating at a reduced performance level.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPPEA13 |
*Attention* Contact your hardware service provider now. (Internal analysis of exception data indicates that hardware service is recommended to maintain system performance.) |
AUD |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPPEA26 |
*Attention* Contact your hardware service provider now. (Internal analysis of exception data indicates that hardware service is recommended to maintain system availability.) |
AUD |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPPEA32 |
Storage subsystem configuration error. |
AUD |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPPEA38 |
*Attention* Contact your hardware service provider now. (A system error has occurred.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPPEA39 |
*Attention* Contact your hardware service provider now. (A critical system error has occurred. The system will automatically IPL using redundant resources.) |
AUD |
99 |
*NOPASS (0) |
*HIGH (1) |
|
CPP0DDA |
A system processor failure is detected in slot 9 |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DDB |
A system processor failure is detected in slot 10 |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DDC |
A system processor error is detected. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DDD |
System processor diagnostic code detected an error. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DDE |
A system processor error is detected. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DDF |
A system processor is missing. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP0DD9 |
A system processor failure is detected. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP1604 |
*Attention* Impending DASD failure. Contact your hardware service provider now. (Internal measurements on disk device &28 indicate that an unrecoverable error resulting in data loss is about to occur.) |
AUD |
90 |
*NOPASS (0) |
*HIGH (1) |
|
CPP29BA |
Hardware error on device under controller. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP29B0 |
Recovery threshold exceeded on device under controller. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP29B8 |
RAID protection suspended on controller. |
STG |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP29B9 |
Power protection suspended on controller. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP951B |
Battery Power Unit fault. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9522 |
Battery Power Unit fault. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP955E |
A Battery Power Unit is not installed in the 9406 system unit. |
SYS |
60 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9575 |
The Battery Power Unit in the 9406 needs to be replaced. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9576 |
The Battery Power Unit in the 9406 needs to be replaced. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9589 |
Test of the Battery Power Unit is complete. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9616 |
A Battery Power Unit is not installed. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9617 |
A Battery Power Unit needs to be replaced. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |
|
CPP9618 |
A Battery Power Unit needs to be replaced. |
SYS |
70 |
*NOPASS (0) |
*MEDIUM (2) |