Monthly Release Notes - June 2023

Jump to:

Agari Alert Logic Automate Beyond Security
Boldon James Bytware CCSS Clearswift
Cobalt Strike Core Security Digital Defense Digital Guardian
Document Management (RJS) FileCatalyst Globalscape GoAnywhere
Halcyon HelpSystems One IBM Partnership Insite
InterMapper JAMS Powertech Robot
Safestone Sequel Showcase Skybot
Tango/04 TeamQuest Titus Vera

 

Alert Logic

Alert Logic MDR and Fortra XDR

June 22, 2023

Alert Logic has updated the Incidents Console with several improvements, including:

  • A new table that allows you to more easily view incidents

  • Improved UI performance providing faster page load speed

  • Bulk actions that are more intuitive

  • Enhanced incident preview for quickly reviewing incident details

For more information on these updates, refer to 06/22/2023: Incident Console Improvements.

Back to Top

 

Beyond Security

Version 13.1.0

June 21, 2023

Enhancements

  • Added support for Windows 11.

  • Updated the IEEE802.11 (AP), IEEE802.11 (AP - Simple), IEEE802.11 (Subscriber), and IEEE802.11 (Subscriber - Simple) modules to be compatible with Windows 10 or later.

  • Changed the error message for entering an invalid hostname or IP address on the Basic Configuration window to be easier to understand.

  • Added an enhancement to prompt a confirmation dialog when deleting a module's default buffer types.

  • Removed the IEEE802.11 (Subscriber - Simple - UDP), CG4579 (Over PCAN) - Custom, and Running Speed and Cadence (Custom) modules.

    NOTE: If your projects use these modules, substitute them with the IEEE802.11 (Subscriber - Simple), CG4579 (Over PCAN), and Running Speed and Cadence modules.
Fixes

  • Fixed an issue where the source port for some tests was incorrect due to endian issues caused by the EDSAv2-406 TCPv4 and EDSAv3-406 TCPv4 modules.

  • Fixed an issue where the Simple Web Server module would stop responding when the default port number (80) was in use. The module now reports an error and allows you to change the port setting to an available number.

  • Fixed an issue where deleted module buffer types were still used to generate fuzzed data.

  • Fixed an issue where saving a project in the Console Client would repeatedly display the "Settings were saved successfully to" message.

Back to Top

 

Digital Guardian

Version: 4.3.0

June 6, 2023

Enhancements

  • Enhanced the implementation of the Investigation Workspace to make using it smoother, more responsive and faster to generate or update

  • Reduced the time it takes to display the workspace on initial load and improvedresponsiveness to user interactions

  • Enhanced the animations displayed during workspace updates

  • Improved the long-term stability of the workspace

Fixes

  • Resolved an issue where a customer’s ARC detection rules were not honoring the regex entries in the classification name field. Regex entries worked in other fields.

Agent for MacOS

Version: 8.4.1

June, 2023

New Features

  • You can run DG Agent on macOS 13.4 (Ventura).

  • DG Agent now supports CA Certificates generated by ARC. These certificates are generated in ARC for the Digital Guardian Web Inspection Proxy component on agents. This feature is available only for MSP customers. Please contact Support to enable this feature. Agent sends an Operational Alert to DGMC when DG WIP is unable to inspect the websites due to communication failure with DG ARC to obtain a server certificate when ARC is enabled as a certificate authority.

Fixes

  • The lag experienced when opening or selecting options in the System Preferences window has been eliminated in this release.

  • Incorrect conversion from string variable to int is encountered which leads to ill effects and system crash. This issue is fixed now.

  • The issue of lag with the cursor select tool in Adobe Illustrator, which caused clicked items to be unexpectedly moved to new locations, has been fixed.

  • The problem of keyboard lag, which caused delay while typing in various applications, has been resolved.

  • The issue of system freezing for a brief period followed by EPS Timeout notification pop-ups has been resolved.

nDLP Appliance

Version: 11.8.2

June, 2023

New Features

  • A new host filter (URL_host_filter) is added specifically for ICAP request filtering in the policy creation section under “Sources/Dest.” tab. When selecting the URL host filter, other sources/destination network filters are disabled automatically as they are not relevant for this feature. In the previous releases, the Network Filters, allowed configuration of source/destination IP address or address group to add a source/destination constraint for an IP address host, range, network, or any grouping of hosts, ranges, or networks. However, in this release we can add a domain or a group of domains to the URL filter which will be utilized by ICAP traffic monitor in the appliance.

  • Whenever modifications are made to the user/roles and diagnostic modules, the logs will now include comprehensive details about the actions performed. Logging capabilities have been enhanced to capture any changes made to the user/roles and diagnostic modules.

 

Back to Top

 

Globalscape

EFT
v8.1.0.16

Jun 5, 2023

Fixes
EFT Event Rules

  • Fixed an issue where EFT event rules configured with Matching Filenames set to Numerate on local file uploads would not numerate the initial file properly.

EFT Security Updates

Back to Top

EFT Arcus
v8.1.1.16

Jun 5, 2023

EFT Arcus has been updated to roll in the changes from previous releases of EFT on-premises. Refer to the EFT release notes in the Client Success Portal (https://portal.globalscape.com/) for more info about each of the EFT on-premises releases.

New Features

  • Replaced Remote Desktop Gateway with Microsoft Azure VDI link.

  • Added VFS upload quotas

  • Added ability to map Site root to cloud storage

  • Added ability to group Advanced Workflows in folders

  • Added ability to use the Workspaces variable WS_OWNER_NAME in File Send email template

  • Added per-user folder encryption key

  • Added PCI 3.6.4 SSL Certificate Rotation Period Notification

  • Added ability to specify more parameters in the Pre/post commands dialog box in the Protocol: Upload and Protocol Download Action for connections to a mainframe computer.

  • Added context variable condition %USER.HOME_FOLDER_PATH% to provide entire path to a user's home folder

  • Added ability to select multiple event rules in the EFT admin interface and move them to a folder in the Event Rules node.

  • Added cloud virtual folder processing in Event Actions

  • Added "Zip Plus" folder downloads in Workspaces for guest users

  • Added ability to export RAM status into CSV or ARM

  • Added support for using compress/ decompress Action in Remote Agent Rules

  • Added Advanced Properties:

    • FailOnPGPVerifyOfUnsignedFile - If set to true, the OpenPGP action will fail if the target file is not signed. When If action failed is enabled, the event rule will trigger the failure if the PGP file is missing the signature.

      • UseLegacyAdminPermissionsForREST

      • Type: bool

      • Default Value: false

      • Description: Use the old admin permissions for REST API.

    • SMTP settings not sending:

      • SmtpTlsMaxVersion

      • Type: uint32_t

      • Default Value: 3

      • Minimum Value: 0

      • Maximum Value: 4

      • Description: SmtpTlsMaxVersion: 0 - SSL 3.0, 1 - TLS 1.0, 2 - TLS 1.1, 3 - TLS 1.2, 4 - TLS 1.3

    • SmtpTlsMinVersion

      • Type: uint32_t

      • Default Value: 3

      • Minimum Value: 0

      • Maximum Value: 4

      • Description: SmtpTlsMinVersion: 0 - SSL 3.0, 1 - TLS 1.0, 2 - TLS 1.1, 3 - TLS 1.2, 4 - TLS 1.3

  • REST API endpoint additions or changes:

    • REST: ARM Reports

    • REST: VFS Cloud

    • REST: Remote Agents

    • REST: Authentication endpoint to return info about admin session

    • REST: Connection Profiles

    • REST: Include last password change details in UserId metrics

    • REST: Advanced Workflows

    • REST: Custom commands endpoint

    • REST: Certificate get/set endpoints

    • REST: Permission Groups and User Settings Template endpoints

Enhancements

  • Converted EFT Arcus to 64bit (x64)

  • Converted EFT Arcus to the module-based licensing introduced in EFT v8.0.7.

  • Updated PGP library (EFT uses IPWorks OpenPGP 2020 v20.0.8136 from /n Software for secure OpenPGP messaging and advanced encryption and decryption, and is RFC 4880 compliant.)

  • TermsOfService.json is now in the config share so it will persist across VM scale-ins (Terms of Service and Privacy Policy default files are just templates. You must create your own Terms of Service and Privacy Policy in your language(s).

  • EFT templates are now all in one location, Templates

  • Provide 5 free Workspaces seats when HTTPs Protocol is licensed

  • Updated AWS S3 regions list in Copy/Move to and Download from Cloud Storage event rule actions

  • Extended auto-ban capabilities and added two new advanced properties

Back to Top

GoAnywhere

GoAnywhere MFT

Version 7.2.1

June 27, 2023

New Features

  • Added a failed login limit for Admin Users.

Enhancements

  • Enhanced the diagnostics page support bundle functionality to clean up thread dump files in the log directory that were included in the archive.

  • Enhanced the support bundle archive name to include the date and time.

  • Enhanced the support bundle archive to build on the file system to reduce the impact on memory.

  • Enhanced the caching strategy for trigger processing.

  • Added the transfer ID (PI-13) as a file path variable on PeSIT Receive File templates.

Updates

  • Updated the Spring Framework library from 5.3.21 to version 5.3.27.

  • Updated IPWorks Zip from version 2016 to version 2022.

  • Updated the Admin Client JDBC URL Wizard to support changes made in Oracle version 19c. The connection property separator syntax now uses '?' to indicate the start of connection properties and '&' as a delimiter between each property.

  • Reverted license changes made in 7.0.0 to add quantities to some licensed features.

Fixes

  • Fixed an issue with domains that occurred when sending certain emails during Web User creation.

  • Fixed an issue that would cause Secure Mail attachments to be corrupted when creating Secure Mail messages from GoDrive or Secure Folders via Send To.

Back to Top

IBM Partnership

Backup, Recovery, and Media Services (BRMS)

Version: PTF 7.5 SI83110, 7.4 SI83109, 7.3 SI83108

June 9, 2023

Enhancements

In version 7.3 and later:

  • BRMS for IBM Cloud using VTL iSCSI Devices solution has been enhanced to IPL the iSCSI IOP when the control group brings the system out of restricted state.
  • The process to generate turnkey cloud volumes in image catalog Q1ABRMPOOL has been enhanced to set a valid move policy.
  • BRMS introduces new SQL services to setup the IASP FlashCopy specific system synchronization environment. See the BRMS wiki for more information at https://ibm.biz/brms-enhancements.
Fixes

In version 7.3 and later:

  • Issue where cloud recovery operations may loop if the restore operation reports message MSGCPF3773 has been fixed.
  • Archive control groups issue when a control group containing an entry using an auxiliary storage pool device *CURASPGRP may not storage free the archive objects has been fixed.
  • Fixed problem where RSTLIBBRM with SAVLIB(*RSTLST) ENDOPT(*UNLOAD) may not unload all the volumes when the restore list has a mixture of parallel and serial saved items.
  • Issue where recovery operations may incorrectly report message MSGCPF1015 fixed.
  • Fixed problem where INZBRM OPTION(*MERGE) may fail with message MSGCPF3219.
  • The media text for volumes used by a control group may not be updated when the control group only contains *SPL list entries issue has been fixed.
  • Problem where the BRMS recovery report QP1ARCY2 may not list all the volumes when using the BRMS for IBM Cloud using VTL iSCSI Devices solution has been solved.

In version 7.5 and later:

  • WRKLNKBRM recovery operations may report multiple MSGMCH3601 messages issue fixed.
 

 

IBM PowerHA SystemMirror for IBM i

Version 7.5 HA 5.3.2 SI83862 (plus Language PTFs)
Included in PTF Group SF99676 750 High Availability for IBM i - level 6

June 29, 2023

New Features

  • Greater flexibility and availability in Geographic Mirroring environments with multi-target Geographic Mirroring allowing replication between up to six nodes and simplified hardware upgrades with reduced impact on the production workload using multi-target Geographic Mirroring. Multi-target geographic mirroring introduces the following changes:

    • CFGGEOMIR features a new Target Node (TGTNODE) parameter for multi-target geographic mirroring. This parameter has a default value of *SELECT, with prompting for eligible nodes for the operation.

    • The Configure Geographic Mirroring command has been simplified to remove the synchronization priority (PRIORITY), suspend timeout (SSPTIMO), and tracking space (TRACKSPACE) parameters. These parameters are now configured automatically to the recommended values. Any existing CL programs that specified these parameters on the CFGGEOMIR command may require modification.

    • The simplified Start ASP Session (STRASPSSN) command no longer contains the delivery, suspend timeout (SSPTIMO), or priority parameters. After starting the session, these parameters can now be changed by issuing the Change ASP Session (CHGASPSSN) command with the *CHGATTR option. Any existing CL programs that specified these parameters on the STRASPSSN command may require modification.

    • The Change ASP Session (CHGASPSSN) command features a new target node (TGTNODE) parameter for multi-target geographic mirroring.

    • PowerHA now features the ability to change the amount of tracking space allocated on a per ASP copy basis. The tracking space parameter has been moved from the Change ASP Session (CHGASPSSN) command to the Change ASP Copy Description (CHGASPCPYD) command. Any existing CL programs that specified the TRACKSPACE parameter on the CHGASPSSN command may require modification.

    • Built-in node selection is now available when using the change session options on either Display ASP Session (DSPASPSSN) or through Work with ASP Copy Descriptions (WRKASPCPYD), in environments with multiple nodes.

    • New F10=Topology view on Display ASP Session (DSPASPSSN) for geographic mirroring gives a visual representation of geographic mirroring environments.

  • Increased agility and adaptability in Geographic Mirroring environments featuring the ability to change Geographic Mirroring parameters with minimal impact on the production workload. The following parameters can now be changed using the Change ASP Session (CHGASPSSN) command while the production copy is online:

    • transmission delivery

    • transmission compression

    • synchronization priority

    • suspend timeout

  • Geographic Mirroring environments feature the ability to detach and vary on suspended copies of the ISAP, simplifying recoverability.

Enhancements

  • The PowerHA web interface shows monitored resource details and attribute values.

  • DS8000 LUN-level switching now supports up to 32 host connections per cluster node.

  • The PowerHA web interface now includes an inactivity timeout of 30 minutes and a warning if the web interface is accessed via HTTP instead of HTTPS.

Fixes

  • The QYASRTVINF API now requires *IOSYSCFG authority for all operations. Any existing callers of this API may require *IOSYSCFG special authority if they did not previously have the authority.

  • Previously, PowerHA operations could hang if a user without access to QYASCHGDDD attempted to perform a PowerHA operation. PowerHA has been enhanced so that users no longer need access to either QYASCHGDDD or QYASRTVDDD.

  • Corrected an issue where in some instances, a CPFBBBD: Resource type *AUTL or *PRTDEV not valid, could occur during admin domain operations, including ADDCADMRE.

  • The help text for *ETHLIN resource on ADDCADMRE has been corrected to include the current list of attributes supported for *ETHLIN attributes. This updated help text is only available for language 2924.

  • Resolved an issue where the PowerHA web interface may not automatically refresh in instances where a page was loaded when clustering was inactive.

  • Resolved an issue where the PowerHA web interface may continually flash on the screen when a cluster, cluster node, admin domain, cluster resource group, or session contains certain special characters.

  • PowerHA has been enhanced to retry when 'Connection refused' is received when connecting to a SVC storage system.

  • Resolved issue where an incorrect DS8000 username or password can cause a hang during PowerHA operations.

  • Resolved issue during PowerHA install time where the CCSID of the inet.d configuration file is changed. PowerHA installs saved after application with this fix, such as during a full system save, or SAVLICPGM, will no longer have this issue. Installs from media without this PTF may still require corrective recovery.

NOTE: PTF updates require one or more associated language PTFs. To determine if additional languages you have installed in your environment require a requisite MRI PTF, consult the table of language PTFs in the release cover letter for SF99676.
Version 7.4 HA 4.9.2 PTF SI83746 (plus Language PTFs)
Included in PTF Group SF99666 740 High Availability for IBM i - level 15

June 29, 2023

New Features

  • Increased agility and adaptability in Geographic Mirroring environments featuring the ability to change Geographic Mirroring parameters with minimal impact on the production workload. The following parameters can now be changed using the Change ASP Session (CHGASPSSN) command while the production copy is online:

    • transmission delivery

    • transmission compression

    • synchronization priority

    • suspend timeout

  • Geographic Mirroring environments feature the ability to detach and vary on suspended copies of the ISAP, simplifying recoverability.

Enhancements

  • The PowerHA web interface shows monitored resource details and attribute values.

  • DS8000 LUN-level switching now supports up to 32 host connections per cluster node.

  • The PowerHA web interface now includes an inactivity timeout of 30 minutes and a warning if the web interface is accessed via HTTP instead of HTTPS.

Fixes

  • Previously, PowerHA operations could hang if a user without access to QYASCHGDDD attempted to perform a PowerHA operation. PowerHA has been enhanced so that users no longer need access to either QYASCHGDDD or QYASRTVDDD.

  • Corrected an issue where in some instances, a CPFBBBD: Resource type *AUTL or *PRTDEV not valid, could occur during admin domain operations, including ADDCADMRE.

  • The help text for *ETHLIN resource on ADDCADMRE has been corrected to include the current list of attributes supported for *ETHLIN attributes. This updated help text is only available for language 2924.

  • Resolved an issue where the PowerHA web interface may not automatically refresh in instances where a page was loaded when clustering was inactive.

  • Resolved an issue where the PowerHA web interface may continually flash on the screen when a cluster, cluster node, admin domain, cluster resource group, or session contains certain special characters.

  • PowerHA has been enhanced to retry when 'Connection refused' is received when connecting to a SVC storage system.

  • Resolved issue where an incorrect DS8000 username or password can cause a hang during PowerHA operations.

  • Resolved issue during PowerHA install time where the CCSID of the inet.d configuration file is changed. PowerHA installs saved after application with this fix, such as during a full system save, or SAVLICPGM, will no longer have this issue. Installs from media without this PTF may still require corrective recovery.

NOTE: PTF updates SI83746 require one or more associated language PTFs. To determine if additional languages you have installed in your environment require a requisite MRI PTF, consult the table of language PTFs in the release cover letter at IBM Support.
Version 7.2/3 HA 3.2.11 PTF SI83693 (plus Language PTFs)
Included in PTF Group
SF99876 730 High Availability for IBM i - level 22

June 29, 2023

Enhancements

  • DS8000 LUN-level switching now supports up to 32 host connections per cluster node.

Fixes

  • Previously, PowerHA operations could hang if a user without access to QYASCHGDDD attempted to perform a PowerHA operation. PowerHA has been enhanced so that users no longer need access to either QYASCHGDDD or QYASRTVDDD.

  • Corrected an issue where in some instances, a CPFBBBD: Resource type *AUTL or *PRTDEV not valid, could occur during admin domain operations, including ADDCADMRE.

  • PowerHA has been enhanced to retry when 'Connection refused' is received when connecting to a SVC storage system.

  • Resolved issue where an incorrect DS8000 username or password can cause a hang during PowerHA operations.

NOTE: PTF updates SI83693 require one or more associated language PTFs. To determine if additional languages you have installed in your environment require a requisite MRI PTF, consult the table of language PTFs in the release cover letter at IBM Support.

Back to Top

 

Insite

Version 3.08

June 20, 2023

Enhancements

  • Admin User can now be removed from Insite after successful installation.

  • Updated to Apache Tomcat 9.

Fixes

  • Fixed issue with Insite sending errors to Windows Event Log.

  • Updated Apache Common Text to resolve CVE-2022-42889 vulnerability.

Back to Top

 

JAMS

Version: 7.6.0

June 13, 2023

New Features
  • Scheduler
    • Added the .NET 6 Hosting Bundle as part of the installation for the JAMS Scheduler.
Enhancements
  • Desktop Client
    • Added a new "Certificates" ACL in the Access Control shortcut to manage access to Service certificates.
  • Installer
    • Updated the installer to provide the option to install SQL Server Express on only Windows Server 2016/Windows 10 or higher.
  • Scheduler
    • Improved the stability of Submit Job Tasks in a Sequence Job during failover. Ensure the JAMS Scheduler and JAMS Agent are updated to use this enhancement.
    • Updated to Rebex version 6.12.
Fixes
  • Agents
    • Improved the connection reliability to Agents under heavy load.

    • Resolved an Object Reference error that may occur for slow connections to JAMS Agents.

  • Desktop Client
    • Resolved an issue when enabling or disabling properties on large Sequence Jobs.

    • Resolved an issue with the jExport command where subkeys were not included.

    • Resolved an issue with the new-jkey command where RSA keys did not have a separate subkey for encryption.

    • Resolved an issue with the new-jkey command where the encryption subkeys included with DSA keys were not the key length specified in the command parameters.

  • Installer
    • Updated the Agent MSI file to resolve an issue when upgrading an Agent.
  • Integrations
    • Resolved an intermittent issue with BannerProcedure Jobs where they may display an error message that no log file meta data was received.
  • PowerShell
    • Resolved an issue where the Protect-JEncryption command would return an error when trying to encrypt with a DSA key, even when the key contained an encryption key.
  • Scheduler
    • Resolved an issue where a Job with a Dependency Wait status may not run after ignoring Resource requirements and releasing it to run again.
    • Resolved an issue where a Job with a date-specific dependency remained in the Waiting for Prerequisite state after being released and resubmitted due to a failure.
    • Resolved an issue where restarting the JAMS Scheduler may cancel a Job containing a Runaway Schedule Item in the Monitor view after the specified Runaway time has elapsed.
    • Resolved an issue where releasing multiple failed Submit Job Tasks inside a Parallel Task only allowed one to be released at a time and could cause the Sequence to become stuck.
    • Improved performance by cleaning up references to entries as they complete.
    • Resolved an issue where a failed Job with retries may change the Quantity Waiting property for the Resource and set the Job to a Waiting to Run state.

Back to Top

 

Powertech

Multi-Factor Authentication

Version 1.5.2

June 8, 2023

Enhancements

  • Windows Server installer has been updated to use Microsoft Visual C++ 2017 redistributable.

  • Windows Server installer also includes Microsoft Visual C++ 2010 (x64) redistributable for earlier Windows Server versions.

Fixes

  • Fixed the issue for Backup and Restore when installation is not on C: drive.

  • Fixed an issue between Java 11 and outputting data to a SYSLOG server.

  • Fixed an issue with the Desktop Client having the Soft Token window being placed off the primary screen.

  • Updated Tomcat to version 9.0.70.

  • Updated Log4j default settings to reduce log size.

  • Updated properties files in message-broker/conf directory now contain encrypted passwords.

Multi-Factor Authentication IBM i Agent

Version R01M09

June 8, 2023

Enhancements

  • The product's Help Text and Manual have been updated to reflect the new Fortra branding.

Fixes

  • Updated the IBM i Agent for compatibility with Powertech MFA 1.5.2

  • Processing has been corrected for any user-owned exit program, registered in the product against the Database Server (QIBM_QZDA_INIT) exit point. Such a program is now only run following successful authentication, or if the authentication request was made within an authentication suppression window.

  • Activation and de-activation of authentication against a specific IBM i User Profile no longer requires the issuing profile to have *JOBCTL Special Authority.

  • For a first-time installation, the timeout value for the communications is set to a value of 2 minutes.

  • Additional program objects have been added to the PMAADMIN Authorization List.

  • Ownership of the Command Processing Program for the PMASTRMON and PMAENDMON commands has been changed to a profile with *JOBCTL Special Authority.

  • If a user is not defined as a Multi-Factor Authentication administrator, the resulting message when attempting to run PTMALIB/WRKPTMA, now contains the current user name.

Back to Top

Multi-Factor Authentication IBM i Agent

Version R01M09

June 8, 2023

Fixes

  • Updated the IBM i Agent for compatibility with Powertech MFA 1.5.2

BoKS Manager

Version 8.1 (version update)

June 10, 2023

Enhancements

  • Support added for BoKS Server Agent on Debian 12 - Bookworm.

Robot

Performance Navigator

Version: 19.04

June 6, 2023

Notes
  • Due to a recent development environment change, all Script IDs for AIX/Linux host code have been reset to commence from 1. Now the date in the $Id line is a much better way to check which version of a script is being used.
  • Performance Navigator has been added to the RBO (Robot Automated Operations Solution) menu as Option 26.
  • Performance Navigator product version has been amended to use Robot's RELMOD format for release and modification, thus the release following 19.2D is now 19.04. The next release will be 19.05, and so on.
Enhancements

  • The list of graphs available to use in Edit > Report Sets is now searchable.

  • If an ODBC driver is not present, Performance Navigator will alert the user and recommend steps to obtain one.

  • New report containing information from the Collection Services file QAPMLPARH can be found under Reports > System Activity > Frame Overview. This report only works if the user has "Enable Performance Information Collection" checked off in the General Properties of the HMC.

  • Add D-Raid 6 to Protection Type in What-If.

  • Enhanced use of What-If with Power 10 models.

  • Update GO MPGLIB/PERFNAV, option 5 to bring the user there instead of WRKJOBSCDE if Robot Schedule is used for jobs.

  • Graphs > CPU > Frame > Cores Used (HMC) will show how busy a frame is as a whole. This graph only works if the user has "Enable Performance Information Collection" checked off in the General Properties of the HMC.

  • "Graphs" and "Reports" tabs on the left have been removed. All their items can be found in the Graphs and Reports menus in the menu bar.

  • Performance Navigator has been added to the RBO (Robot Automated Operations Solution) menu as Option 26.

  • Added new messaging in "rackdata.sh -T" for Topas data.

  • Performance Navigator product version has been amended to use Robot's RELMOD format for release and modification, thus the release following 19.2D is now 19.04. The next release will be 19.05, and so on.

  • Added additional columns to the PEP2 analysis portion of What-If.

  • Automated jobs are added to IBM i Basic Scheduler and are no longer added to Robot Schedule.

  • MPGMOVSCH command created to move Performance Navigator jobs between the IBM i Basic and Advanced Job Schedulers and Robot Schedule (if installed and licensed).

  • A new job, PERFNAVDRK, is scheduled monthly to run the command MPGDRK, This is so the reports that rely on this command (such as the File Reorg Summary) have relatively up-to-date data without the user having to manually run the command.

  • The install now uses library qualified calls to system objects.

Fixes

  • Fixed issue where list of libraries for the "Why is my disk growing by object" option was missing libraries that start with special characters.

  • Enhanced the calculation for showing when a disk will reach the guideline percentage.

  • The menu option "Power Analytics > Disk / Library / IFS Analysis > Why is disk growing? (over time) > By Object" has been updated to allow for more than 1000 libraries.

  • Corrected some fields in the Healthcheck for VIOS systems.

  • Fixed some fields pertaining to ASPs other than the System ASP in the Specs page of the Monthly Summary.

  • In order to enhance the navigation of all graphs and reports, the "Graphs" and "Reports" tabs on the left panel of the interface have been removed. All their items are still available in the Graphs and Reports menus on the menu bar.

Robot Schedule Enterprise

Version 3.03

June 1, 2023

Enhancements

  • TLSv1.3 is now supported.

  • Robot Schedule Enterprise now supports IBM i 7.5.

Fixes

  • Java 8 is now required for Unix and Linux agents.

  • Service logs are now stored with other logs.

  • Fixed issue with GETRCV.bat utility receiving error.

  • Fixed issue with agent jobs failing with socket time out error.

  • Fixed error messaging when installing on a version of Java that is not supported.

  • Fixed issue that required agents to be uninstalled then reinstalled instead of updated.

Back to Top

 

TeamQuest

Administration Console

Version 11.4.6

June 15, 2023

Enhancements

  • Upgraded Apache HTTP version 2.4.56

Automated Analytics

Version 11.3.33

June 15, 2023

Enhancements
  • Upgraded Apache Tomcat to version 9.0.74

Back to Top

TeamQuest Manager

Version 11.4.12

June 15, 2023

Enhancements

  • Manager is now supported on version 22.04 Ubuntu Server LTS Linux on x64 systems. The following steps were used to install the 32 bit libraries necessary in running Manager on Ubuntu 22.04:

    1. nano /etc/apt/sources.list

    2. add to the end of the file and save:

    3. sudo dpkg --add-architecture i386

    4. sudo apt-get update

    5. sudo apt-get install libstdc++6:i386

    6. sudo apt-get install libuuid1:i386

  • Upgraded Manager to Apache HTTP version 2.4.56

VCM

Version 2.16

June 15, 2023

Enhancements

  • Upgraded to .NET 6.0.16

    IMPORTANT:

    Due to recent security vulnerabilities found in .NET 6.0.16, we recommend upgrading to the version 6.0.18. Please follow steps found here.

  • Upgraded to Duende IdentityServer version 6.2.3

  • Upgraded Node.js to 16.20.0

Fixes

  • Resolved problem with retentions not working for VCM Collector data

Vityl Monitor

Version 11.4.7

June 15, 2023

Enhancements

  • Upgraded Apache Tomcat to version 9.0.74.

 

Titus

Titus Console

Version 2023.04 HF1

June 21, 2023

Fixes

  • Updated infrastructure due to Azure changes. To improve security, Azure performs permission checks on the roles when creating or updating the Application Gateway in Virtual Network.

TCS for Google Workspace

Version 2023.05 HF1

June 14, 2023

Fixes

  • The classification selector icon was not appearing in Google Docs and Google Slides.

Titus Office Add-in

Version 2023.05 HF1

June 9, 2023

Fixes

  • The Apply header/footer action was unreliable for Word Online documents.

Back to Top

Vera

Version 3.22.2

June 2023

Fixes

  • (Windows Client) Fixed an issue where when a user clicks the Enable Editing (Protected View Only) option on a secured Microsoft Office file, the file must switch to standard view in order to be edited, but the system displays an error stating "This operation is not allowed on secure documents".

Back to Top