and Monthly Release Notes - September 2025
Agari
Version 2025.09
September 2025
New Feature
Policy by Address Groups:
-
Policies can now be applied to specific “From” email addresses via Address Groups.
-
This allows a policy to target a specific list of “From” email addresses.
-
Supports block, allow, or junk actions against a maintained list of addresses.
Updates
On-Demand Policy Workflow Safeguards:
-
Added a confirmation modal to prevent accidental deletion of large message groups.
-
Introduced enforced delay before Enforce Now action is available, reducing risk of accidental bulk deletion.
Message Scoring Details:
-
Message Details now displays additional descriptive text explaining analysis results from the Email Body Content Analysis AI model.
-
Provides visibility into model output when viewing individual message details.
Fixes
-
Various bug fixes and updates.
Digital Guardian
Analytics & Reporting Cloud
Version: 5.5.0
September, 2025
New Features & Enhancements
-
This release enhances the All Workspaces feature by retaining the last selected tab based on the workspace the user was working in. When the user returns to All Workspaces, the system will now reopen the previously active tab, such as Recent or Favorite, instead of defaulting to the All tab. This improvement streamlines navigation and delivers a more intuitive user experience.
Fixes
-
Resolved an issue where exporting CSV or PDF from the Event Details table in the Incident Details pane failed across Chrome, Edge, and firefox.
-
Resolved an issue where the word "User" was incorrectly added at the start of the legend when copying data sets from the default workspace.
-
Resolved an issue where the Investigation Graph workspace was not correctly applying filters properly, causing nodes such as Operations to display unfiltered results.
-
Resolved an issue where an error message and a server error were displayed when sorting incident workspace by the most recently modified items.
-
Resolved an issue where updates to the 'Note' component within workspaces were not being updated.
-
Resolved an issue where Next Gen Child Domains failed to sync due to an LDAP search error.
For more information on domain configuration updates, refer to the full version of Digital Guardian Analytics and Reporting Cloud Release Notes v5.5.0, Resource File Changes section: "Domain Configuration Changes.(page 7)" available on Fortra Support Portal.
-
Resolved an issue that prevented successful installation of the Sync Service in file paths with spaces and improved compatibility with required software.
Agent for Windows
Version: 7.9.7
September, 2025
New Features
-
There are no new updates and enhancements in this release
Fixes
-
Resolved an issue in preparation for Microsoft ending support for Windows 10 on October 14, 2025. This minor release ensures DGAgent runs correctly on Windows 11 24H2 and provides customers additional time to transition before upgrading to DG v9.x, 10.x, or higher, which fully support Windows 11 24H2.
For details on the OpAlert message that may appear when using unsupported agent versions, please refer to the full version of Digital Guardian Agent for Windows Release Notes v7.9.7, Critical Notices section: "Windows Interoperability Issue Detected (page 18)" available on Fortra Support Portal.
Fortra
September 4, 2025
Enhancements
-
Extended Event Fusion Center Roles Content tab to support multiple instances.
Fixes
-
Fixed issue with URL parameters from Event Fusion Center appending to Platform Manager URL.
-
Resolved security vulnerabilities and minor bug fixes.
Globalscape
EFT
v8.3.0.410
September 2, 2025
Fixes
Connection Profile
-
Fixed an issue where after upgrading to 8.3.0. connections to Azure Blob SAS token configured with proxy would fail to connect.
Event Rules
-
Fixed an issue where AWS S3 uploads would fail with files larger than 5GB when using multi-part uploads.
-
Fixed an issue where OpenPGP actions would be skipped when proper permissions are not allocated. As of this patch version, a minimum of READ-ONLY would be required, however, the event rule would be reported as a failure if it cannot modify the file.
-
Fixed an issue where after upgrading to 8.3.0. Event Rules configured with OpenPGP actions would fail to display the used encryption/decryption key.
Known Issues
Connection Profiles
-
Due to the updated AWS SDK C++ connection profiles defined with Amazon S3 (compatible) cloud provider will fail to connect to Google Cloud or Oracle Cloud.
-
When connecting to Google Cloud, it’s recommended to use the Google Cloud provider option rather than the S3 Compatible option.
-
-
Azure connection profiles that require parameters in proxy configurations will fail to pass additional parameters.
v8.2.1.406
September 2, 2025
Enhancements
EFT ARM Queue
-
Added a new Advanced Property (AP) to reduce the ARM queue uploads to the Database after the database connection is restored.
Fixes
ARM
-
Fixed an issue where the Admin GUI failed to refresh ARM reports.
Automate Workflow Module (AWM)
-
Fixed an issue where editing a workflow remotely would fail to display the workflow contents (display would be blank).
Connection Profile
-
Fixed an issue where files larger than 5MB would fail to properly upload when configured with Google Cloud Storage.
Context Variables
-
Fixed an issue where HTTP.SignatureValid Context variable would not work in the PowerShell script for validation.
EFT Administration
-
Fixed an issue where the EFT admin GUI would not properly reflect active sessions.
-
Fixed an issue where Password Expiration Email Notifications would not be sent.
-
Fixed an issue where DMZ fails to enable FTP client listener when only FTP is licensed.
-
Fixed an issue where EFT would connect to DMZ Gateway over HTTP/s when the HTTP/s module was not licensed.
-
Fixed an issue where the EFT service could crash when using a non-supported PKCS12 certificate/key while on FIPS mode.
-
Fixed an issue where the FIPS mode enabled prompt would reference HTTPs even when SSL was not configured for FIPS.
-
Fixed an issue where SFTP FIPS connections would fail if non-FIPS ciphers are enabled prior to starting FIPS mode.
Event Rules
-
Fixed an issue where AWS S3 uploads would fail with files larger than 5GB when using multi-part uploads.
-
Fixed an issue where OpenPGP actions would be skipped when proper permissions are not allocated. As of this patch version, a minimum of READ-ONLY would be required, however, the event rule would be reported as a failure if it cannot modify the file.
-
Fixed an issue where an extra slash was listed on dataset when using wildcards.
-
Fixed an issue where Timer Event Rules with SFTP download action would not recover after network reconnect (OS level network disconnect) without a service restart.
-
Fixed an issue where 'IsDirectory' in dataset loop variable did not work.
-
Fixed an issue where 'If else' statement could not be added inside a dataset loop.
-
Fixed an issue where User Login Failed event rule against a user that no longer exists could crash the EFT server.
Logging
-
Fixed an issue where EFT logs would report an OLE DB provider error after visiting the Admin GUI experimental dashboard.
Remote Agent
-
Fixed an issue where Remote Agents would fail to connect via SFTP using legacy ciphers.
-
Fixed an issue where Remote Agents fail to auto update.
REST API
-
Fixed an issue where EFT Event Rules created via REST did not replicate in an HA cluster.
-
Fixed an issue where an EFT site created via REST did not replicate in an HA cluster.
-
Fixed an issue where 'Assign to site(s)' field was missing in the request body for new admin-user rest endpoint.
-
Fixed an issue where REST API would allow the creation of an EFT site with special characters.
SFTP (SSH)
-
Fixed an issue where under immediate load (3k+ connections within a minute) and long running Automate workflow tasks could cause increased memory usage which could lead to a service crash due to memory exhaustion.
SMTP
-
Fixed an issue where SMTP connections were not being properly closed (connection would eventually timeout).
Workspaces
-
Fixed an issue where an email verification link would break if the workspace owner username contained special characters.
Known Issues
Connection Profiles
-
Due to the updated AWS SDK C++ connection profiles defined with Amazon S3 (compatible) cloud provider will fail to connect to Google Cloud or Oracle Cloud.
-
When connecting to Google Cloud, it’s recommended to use the Google Cloud provider option rather than the S3 Compatible option.
-
-
Azure connection profiles that require parameters in proxy configurations will fail to pass additional parameters.
Powertech
BoKS Manager
Version 8.1 (version update)
September 11, 2025
Client c-8.1.0.25
Fixes
-
Fixed an issue where boks_sshd with bdebug only accepted one connection at a time.
-
Fixed uname error while installing AIX package.
Version 9.0 (version update)
September 9, 2025
Server s-9.0.0.2
New Features
-
Added a new parameter for modify[Boks]User: createDirectoryHost.
Fixes
-
Fixed the issue with migration tool converting old 8.x log messages on Replicas that can prevent message queues from draining.
-
Fixed the issue where blogrd and blogsd might dump core in signal handler.
-
Fixed the issue where ssh access auditlog did not contain ruleId for matching learnmode rule.
-
Fixed the issue where hostadm -l -G dumps core if host does not exist.
-
Fixed the issue where BoKS fails to connect to external syslog server, causing audit log queue build-up and duplicated messages.
-
Fixed the issue where BoKS ails to connect to server, causing bccasd to dump core.
Encryption for IBM i
Version 4.05
September 10, 2025
New Features
-
A new feature has been added to the Work with Field Encryption (WRKFLDENC) display panel, allowing users to view fields that have pending keys set.
-
A new report has been added that outputs the key policy and security setup for Powertech Encryption for IBM i. The Print Configuration Report (PRTCONFIG) can be run with options *ALL, *KEYPCY, *KEYOFR, or *ALERT.
-
The ability to remove unused field encryption registry entries has been added to the product, by using the new Clean Field Registry (CLNFLDREG) command. This command takes in parameters to determine how the entries will be cleaned and has an action option to either inspect the entry, which outputs the findings in the job log, or clean the entry (or entries), which makes updates to the registry.
Fixes
-
The Change Field Encryption (CHGFLDENC) command has been enhanced to import all existing values, display the total number of changes made, or indicate if no changes were made.
-
Resolved an issue where a profile with security officer authority, who was not on the authorization list for full value, was able to run the translate field encryption command, which would then fail and not report the expected error messages correctly.
-
An issue retrieving short external key IDs through a KMIP external key manager has been resolved.
-
An issue that created duplicate entries in the Print Field Proc Audit (PRTFLDAUDC) report, when the command was run multiple times in sequence, has been corrected.