Azure Storage - Get all messages

Declaration

<AMAZURESTORAGE ACTIVITY="get_all_message" SESSION="text" ACCOUNTNAME="text" ACCESSKEY="text (encrypted)" PROTOCOL="text (options)" TIMEOUT="number" BLOBENDPOINT="text" QUEUEENDPOINT="text" TABLEENDPOINT="text" PROXYTYPE="text (options)" PROXYSERVER="text" PROXYPORT="number" PROXYUSERNAME="text" PROXYPASSWORD="text (encrypted)" QUEUE="text" RESULTDATASET="text" VISIBILITY="number" DELETE="YES/NO" FOLDER="text" SAVEMODE="text (options)" />

Related Topics    

Description

Retrieves all queue messages and populates a dataset with results. 

Practical usage

Commonly used to archive queue messages before deleting them from the queue.

Parameters

Connection

Property Type Required Default Markup Description
Connection --- --- --- --- Indicates where user credentials and preferences should originate from. The available options are:
  • Host (default) - Specifies that user credentials and advanced preferences are configured individually for this activity. This option is normally chosen if only a single activity is required to complete an operation.
  • Session - Specifies that user credentials and advanced preferences are obtained from a pre-configured session created in a prior step with the use of the Azure Storage - Create session activity. This option is normally chosen if a combination of related activities are required to complete an operation. Linking several activities to a single session eliminates redundancy. Additionally, a single task supports construction and simultaneous execution of multiple sessions, improving efficiency.
NOTE: This parameter does not contain markup and is only displayed in visual mode for task construction and configuration purposes.

Connection - Session

Property Type Required Default Markup Description
Session Text Yes, if Connection is set to Session AzureStorageSession1 SESSION="MyAzureSession" The name of the Azure Storage session to create. The default value is AzureStorageSession1.
NOTE: Use the Azure Storage - End session activity to end an active Azure Storage session.

Connection - Host > Credentials

Property Type Required Default Markup Description
Account name Text Yes, if Connection is set to Host (Empty) ACCOUNTNAME="myaccount" The globally unique name of the Windows Azure storage account.
Access key Text Yes, if Connection is set to Host (Empty) ACCESSKEY="[AccessKey]" The primary or secondary access key (each composed of 88 ASCII characters) used to authorize access to Azure Storage. Manually enter an access key, or click the icon to select from the list of credentials variables available to you that may correspond with this activity.

Connection - Host > Advanced

Property Type Required Default Markup Description
Protocol Text (options) No HTTPS
  • PROTOCOL="HTTPS"
  • PROTOCOL="HTTP"
 The type of protocol used to access Azure Storage. The available options are:
  • HTTPS (default) - Hypertext Transfer Protocol Secure
  • HTTP - Hypertext Transfer Protocol
Timeout (seconds) Number No 90 TIMEOUT="180" The timeout interval (in seconds) for requests made to the storage service. If the timeout elapses before a server response is returned, the operation times out and the service returns an error. The default timeout value is 90 seconds.
Blob endpoint URI Text No (Empty) BLOBENDPOINT="http://accnt.blob.core.windows.net" The endpoint for the Blob service, as configured for the Azure Storage account. The default Blob service endpoint is [http/https]://accountname.blob.core.windows.net, where accountname is the name of the Azure Storage account.
Queue endpoint URI Text No (Empty) QUEUEENDPOINT="http://accnt.queue.core.windows.net" The endpoint for the Queue service, as configured for the Azure storage account. The default Queue service endpoint is [http/https]://accountname.queue.core.windows.net, where accountname is the name of the Azure Storage account.
Table endpoint URI Text No (Empty) TABLEENDPOINT="http://accnt.table.core.windows.net" The endpoint for the Table service, as configured for the Azure storage account. The default Table service endpoint is [http|https]://accountname.table.core.windows.net, where accountname is the name of the Azure Storage account.
Proxy type Text (options) Yes System default
  • PROXYTYPE="none"
  • PROXYTYPE="http"
 The type of proxy required for SharePoint connections passing through a proxy server. The available options are:
  • System default (default) - Points to the default proxy used by the system.
  • None - No proxy authentication required.
  • HTTP - Proxy type is HTTP.
Use authentication --- No --- --- If enabled, specifies proxy authentication is required, enabling authentication-based parameters (disabled by default). It is active only if the Proxy type parameter is set to HTTP.
NOTE: This parameter does not contain markup and is only displayed in visual mode for task construction and configuration purposes.
Proxy server Text Yes, if Proxy type is set to HTTP (Empty) PROXYSERVER="proxy.host.com" The hostname (server.domain.com) or IP address (xxx.xxx.xxx.xxx) of the proxy server. This parameter is available only if the Proxy type parameter is set to HTTP.
Proxy username Text No (Empty) PROXYUSERNAME="username" The proxy username to authenticate with. This parameter is available only if Use authentication is enabled.
Proxy port Number No 808 PROXYPORT="8080" The port number to use to connect to the proxy server. This parameter is available only if the Proxy type parameter is set to HTTP. The default value is 808.
Proxy password Text No (Empty) PROXYPASSWORD="encrypted" The proxy password to authenticate with. This parameter is available only if Use authentication is enabled.

Message

Property Type Required Default Markup Description
Queue name Text Yes (Empty) SESSION="myPDFseesion" The unique name of the storage queue that contains the messages to retrieve.
Create and populate dataset with message information Text (options) Yes (Empty) RESULTDATASET="theMessage" The name of the dataset to create and populate with information about the messages to retrieve. See Datasets below for more details.
Visibility timeout (seconds) Text No (Empty) VISIBILITY="1000" After a message has been retrieved, it is reserved for deletion until the interval entered in this parameter has surpassed and no other client may retrieve the message during this period. If the message is not deleted before the time specified, it again becomes visible to other clients.
Delete Yes/No No Yes DELETE="yes" If selected (default), specifies that the messages will be deleted rather than becoming visible. If disabled, messages are not deleted, instead, they again become visible to other clients.
Save messages in folder Text No (Empty) FILE="c:\temp\" If the corresponding checkbox is enabled, specifies a valid path and folder name in which to store messages and their contents. If disabled, messages and their contents will not be stored locally.
If filename already exists Text (options) No Do not save
  • SAVEMODE="do_not_save"
  • SAVEMODE="unique"
  • SAVEMODE="overwrite"
 If selected, any matching file names that exist in the destination folder will be overwritten. If disabled (default), matching file names will not be overwritten, however, an error will occur as a result.

Description

Error Causes

On Error

Additional notes

Datasets

A dataset is a multi-column, multi-row object that contains a collection of information gathered during runtime and stored in memory. This activity creates and populates a dataset with the following fields (rows):

Name Type Return Value
theDataset.DequeueCount Number The number of times this message has been de-queued. When a message is retrieved for the first time, its DequeueCount property is set to 1. If it is not deleted and is subsequently retrieved again, the DequeueCount property is incremented.
theDataset.ExpirationTime Text The date/time that the message expires.
theDataset.Id Text The unique ID of the message.
theDataset.InsertionTime Date The date/time that the message was initially added to the queue.
theDataset.NextVisibleTime Date The next date/time that the message will be available to be read, if it is not deleted at the time it was retrieved.
theDataset.PopReceipt Text Indicates that the message has been read and is used to verify that the message being deleted is the same one that was retrieved.
theDataset.Text Text The message that was retrieved.

Example

NOTE:
  • Copy and paste the sample AML code below directly into the Task Builder Steps Panel.
  • To successfully run the sample code, update parameters containing user credentials, files, file paths, or other information specific to the task to match your environment.

Description

This sample task creates an Azure storage session, retrieves all messages from a specified queue and populates a dataset with results. It then loops through the dataset of retrieved queue messages and deletes a message with a specific ID/POP receipt. An End session activity marks the end of the session as well as the task.

Copy 
<!-- Create session -->
<AMAZURESTORAGE ACTIVITY="create_session" ACCOUNTNAME="netauto2004" ACCESSKEY="AM2rpq73bKmXN7UmqHdyKZZ3qCaiN3apmzen5q83eWmU967mr7d7aZs3oma592opmjeiZqF3eymLN60mpTdtaZu3oiamN3Upk/ev5qb3eCmK96Vmq7dzqZO3pyant3vplfeq5q23fGmYN7HmuPdyqZZ3tyajt3UpnHevJqg3femed6impnd7KZ+3r2aht3pplnevJr43aimat7Ymvvd4aZz3sOai93KpmjepJq73b6mJd7smszdg6YY3g==aME" PROTOCOL="http" SESSION="myQueueSession" />
<!-- Get all messages from queue -->
<AMAZURESTORAGE ACTIVITY="get_all_message" QUEUE="myqueue" RESULTDATASET="theDataset" DELETE="no" PROVIDER="session_based" SESSION="myQueueSession" />
<!-- Loop dataset -->
<AMLOOP ACTIVITY="dataset" DATASET="theDataset"><!-- Delete message with specific ID/Pop receipt --><AMAZURESTORAGE ACTIVITY="delete_message" QUEUE="myqueue" ID="3b402357-2f5c-4b10-ae71-d9aca57e3f4e" POSTRECEIPT="AgAAAAEAAACzOQAALzOCMJGkzAE=" PROVIDER="session_based" SESSION="myQueueSession" /><!-- End loop --></AMLOOP>
<!-- Delete message with specific ID/Pop receipt -->
<AMAZURESTORAGE ACTIVITY="delete_message" QUEUE="myqueue" ID="3b402357-2f5c-4b10-ae71-d9aca57e3f4e" POSTRECEIPT="AgAAAAEAAACzOQAALzOCMJGkzAE=" PROVIDER="session_based" SESSION="myQueueSession" />
<!-- End loop -->
<AMLOOP ACTIVITY="end" />
<!-- End session -->
<AMAZURESTORAGE ACTIVITY="end_session" SESSION="myQueueSession" />