Automate Schedule - List agents |
Declaration
<AMSKYBOT ACTIVITY="list_agent" IP="text" PORT="text" USERNAME="text" PASSWORD="AM4vZNb16GS1yn44HJobiBwzw==aME" RESULTDATASET="text" /> |
Description
Retrieves a list of agents matching the filter parameters specified (if any) and populates a dataset with the name of each agent.
NOTE: To see the list of agents, you must have View authority to the "Agents" secured object. |
Practical Usage
Used to retrieve a list of agents in order to perform other Automate Schedule activities on them during subsequent steps.
Parameters
Connection
Property |
Type |
Required |
Default |
Markup |
Description |
Connection |
--- |
--- |
--- |
--- |
Indicates where this activity's Automate Schedule credentials should originate from. This is a visual parameter used only during design-time, thus, contains no properties or markups. The available options are:
|
Session |
Text |
Yes if Connection parameter set to Session |
Automate ScheduleSession1 |
SESSION="Session1" |
The name of the session to associate this activity with. This parameter is active only if the Connection parameter is set to Session. If the Connection parameter is set to Host, this parameter is ignored and the remainder of the parameters specified below becomes active. NOTE: Use the End Session activity to end an active Automate Schedule session. |
Server |
Text/Number |
Yes if Connection parameter set to Host |
(Empty) |
|
The Domain Name System (DNS) name (i.e. www.domain.com) or IP address (i.e. 93.184.216.119 ) of the Automate Schedule Server with which to establish communication. |
Port |
Number |
Yes if Connection parameter set to Host |
(Empty) |
PORT="8008" |
The TCP/IP port assigned to allow communication with Automate Schedule. |
User name |
Text |
Yes if Connection parameter set to Host |
(Empty) |
USERNAME="SuperFlyBot" |
A valid username of a user configured to access Automate Schedule. NOTE: Certain Automate Schedule activities may or may not be permitted depending on the permissions set for the user. |
Password |
Text |
Yes if Connection parameter set to Host |
(Empty) |
PASSWORD="encrypted" | A valid password configured for the username entered above. |
Proxy type |
Text (options) |
No |
Default |
|
The type of proxy required for Automate Schedule connections that pass through a proxy server. The available options are:
|
Use authentication |
--- |
--- |
--- |
--- |
If enabled, indicates that proxy authentication is implemented, thus, the authentication-based parameters specified below are put into effect. This is a design-time parameter, therefore, contains no properties or markups. It is active only if the Proxy type parameter is set to HTTP. |
Proxy server |
Text |
No |
(Empty) |
PROXYSERVER="proxy.host.com" |
The host name (server.domain.com) or IP address (xxx.xxx.xxx.xxx) of the proxy server. This parameter is available only if the Proxy type parameter is set to HTTP. |
Proxy username |
Text |
No |
(Empty) |
PROXYUSERNAME="ProxyUser" |
The proxy username to authenticate with. This parameter is available only if the Use Authentication parameter is enabled. |
Proxy password |
Text |
No |
(Empty) |
PROXYPASSWORD="encrypted" |
The proxy password to authenticate with. This parameter is available only if the Use Authentication parameter is enabled. |
Proxy port |
Number |
No |
8008 |
PROXYPORT="8008" |
The port that should be used to connect to the proxy server. This parameter is available only if the Proxy type parameter is set to HTTP. The default value is 8008. |
Agent
Property |
Type |
Required |
Default |
Markup |
Description |
Create and populate dataset with agents |
Text |
Yes |
(Empty) |
RESULTDATASET="agentsList" |
The name of the dataset to create and populate with the list of agents. For more details, see Datasets below under Additional Notes. |
Filter
Property |
Type |
Required |
Default |
Markup |
Description |
Field name |
Text |
No |
(Empty) |
VARBINDNAMES="theFieldName" |
The field name to associate with the value entered under the Field value parameter. This enables filters to be set by way of name/value pair. For more details, see Filters below under Additional Notes. |
Field value |
Text |
No |
(Empty) |
VARBINDVALUES="theValue" |
The field value that should match the field name selected under the Field name parameter. This enables filters to be set by way of name/value pair. For more details, see Filters below under Additional Notes. |
Additional Notes
Datasets
A dataset is a multiple column, multiple row container object. This activity creates and populates a dataset containing a specific field in addition to the standard dataset fields. The table below describes this field (assuming the dataset name assigned was theDataset).
Name |
Type |
Return Value |
theDataset.agentname |
Text |
Returns the assigned name of the agent. |
Filters
This activity features a filtering mechanism designed to examine each output request for certain qualifying criteria. You determine which objects to filter by way of name/value pair, whereby, only objects with values matching the field name you specify will qualify.
To add a filter:
-
Click the Add button. A Filter Editor dialog appears (as shown below).
- In the Field Name parameter, click the drop-down arrow and select from the available fields in which to filter. Note that field names vary depending on the activity.
- In the Value parameter, enter a value that should match the selected field name.
- Click OK when finished.
To Edit a Filter:
- Select a Field Name/Value pair listed under the Filter property.
- Click the Edit button to open the Filter Editor dialog.
- Make appropriate changes then click OK when finished.
To Delete a filter:
- Select a Field Name/Value pair listed under the Filter property.
- Click the Remove button to permanently delete the filter.
Enabling Automate Schedule Web Service
By default, Automate Schedule has the web services option disabled. This will prevent Automate's Automate Schedule actions from running. To enable the Automate Schedule Web Service, log into Automate Schedule's UI and select from the main menu Admin -> System Settings. Scroll down to the Configure Features section and click the EDIT link. Check the Allow Web Service Requests check box (as shown below) and save the settings.
Example
- The sample AML code below can be copied and pasted directly into the Steps Panel of the Task Builder.
- Parameters containing user credentials, files, file paths, and/or other information specific to the task must be customized before the sample code can run successfully.
Description
This sample task demonstrates use of sessions and loop operations as well as the List agents and Hold agent queue activities:
Step 1 - A Create session activity creates and starts a Automate Schedule session in which subsequent Automate Schedule steps can link to.
Step 2 - A List agents activity retrieves all agents and places their names in a dataset.
Step 3 - A Loop dataset activity loops through the dataset.
Step 4 - During each iteration, a Hold agent queue activity performs a hold on the next agent on the list.
Step 6 - An End loop activity ends the loop operation.
Step 7 - An End session activity ends the current session.
<AMSKYBOT SESSION="Skybot_1" IP="10.0.1.69" PORT="8008" USERNAME="admin" PASSWORD="AM4xbZm+mwQN5MGOCNMiHvJ5srNQYnFndV8aME" />
<AMSKYBOT ACTIVITY="list_agent" SESSION="Skybot_1" RESULTDATASET="theAgent" />
<AMLOOP ACTIVITY="dataset" DATASET="theAgent"><AMSKYBOT ACTIVITY="hold_agent_queue" SESSION="Skybot_1" AGENTNAME="%theAgent.AgentName%" /></AMLOOP>
<AMSKYBOT ACTIVITY="hold_agent_queue" SESSION="Skybot_1" AGENTNAME="%theAgent.AgentName%" />
<AMLOOP ACTIVITY="end" />
<AMSKYBOT ACTIVITY="close_skybot" SESSION="Skybot_1" />