Configuring FTP Transfers on the Site

You can configure FTP connections to the Site on the Site's Connections tab. You can enable or disable FTP transfers at the Site, Setting Template, or per user.

To configure FTP transfers at the Site

1. In the Administrator, connect to EFT Server and click the Server tab.

2. In the left pane, click the Site that you want to configure.

3. In the right pane, click the Connections tab.



4. Select the FTP, FTPS (SSL/TLS) - Explicit, or FTPS (SSL/TLS) - Implicit check box.

5. Specify the port used for the connection (by default, 21 for plain FTP or 990 for FTPS Implicit).

6. Click FTP/S Configure. The FTP Settings dialog box appears.



7. Configure one or more of the following options, as needed:

• Allowing Site-to-Site Transfers (FXP)

• Allowing or Disallowing Client Anti-Timeout Schemes (NOOP)

• Allowing Multipart Transfers (COMB Command)

• File Integrity Checking (XCRC)

• Specifying a PASV IP or PASV Port Range

• Connection Banner Message

• User Limit Message

• Exit Messages

8. Click OK to close the dialog box.

9. Click Apply to save the changes on EFT Server.

10. If you selected FTPS (SSL/TLS), assign an SSL certificate to use.