OpenDocument Spreadsheet - Select cell(s)

OpenDocument Spreadsheet - Select Cell(s)

Declaration

Description:

Selects a single cell or multiple cells, ranges, rows or columns within the currently active worksheet.

NOTE: Unlike Excel activities, the OpenDocument Spreadsheet activities do not rely on Microsoft's Excel engine to perform their work, therefore, Microsoft Excel does not need to be installed on the system in order to use these activities. Supported file types include Excel (*.xls, *.xlsx, *.xlsb, *.xlsm ), Open document spreadsheet (*.ods) and CSV (Comma Separated Value) files (*.csv).

Practical Usage

Often used to select cells, ranges, rows, or columns, for example, to perform actions on the selection (e.g.,format the data or insert values) during subsequent steps. Be aware that this activity works only on the active worksheet. To activate a specific worksheet, use the Activate worksheet activity.

NOTE: If a worksheet has been protected, you may not be able to select cells or their contents.

Parameters

Resource

Property	Type	Required	Default	Markup	Description
Resource	---	---	---	---	Indicates where the source workbook document should originate from. This is a design mode parameter used only during task construction and configuration, thus, comprises no markup. The available options are: File (default) - The source document derives from a file located on the system. This option is normally selected if only a single activity is required to complete the operation. Session - The source document is obtained from a pre-configured session created in an earlier step with the use of the Open/Create workbook activity. This option is normally selected if a combination of related activities are required to complete an operation. Consolidating several activities to a single session can eliminate redundancy. Moreover, a single task supports multi-session executions which can improve efficiency and speed up production.
Session	Text	Yes if Resource is set to Session	OPENDOCSession1	SESSION="mySession"	The name of an existing session to associate this activity with. The default session name is OPENDOCSession1. This parameter is active only if the Resource parameter is set to Session.
Get document by	Text (options)	Yes if Resource is set to File	Open	CONNECTBY="open_workbook" CONNECTBY="create_workbook"	Specifies whether this activity will be performed on an existing document or on a new one. This parameter is active only if the Resource parameter is set to File. The available options are: Open (default) - This activity will be performed on an existing document that will be opened during runtime. Create - This activity will be performed on a new document to be created during runtime.
File name	Text	Yes	(Empty)	WORKBOOK="C:\Temp\fileName.xls"	If the Get document by parameter is set to Open, specifies the path and filename of the document in which to open. If the Get document by parameter is set to Create, specifies the path and filename in which to save the newly created document.
Password to open (optional)	Text	Yes if Get document by parameter is set to Open	(Empty)>	OPENPASSWORD="encrypted"	The password required to open the document if it is password protected. This parameter is active only if the Get document by parameter is set to Open.
Create from template	Text	Yes if Get document by parameter is set to Create	No	WORKBOOKTEMPLATE= "C:\Temp\file.xls"	If enabled, specifies the path and filename of a template file that already has preferred formatting in which to base the new workbook on. A template can include formatting, styles, standardized text such as page headers and row and column labels. This parameter is active only if the Get document by parameter is set to Create. It is disabled by default.
On completion	Text (options)	No	Save	SAVETYPE="save" SAVETYPE="save_as" SAVETYPE="do_not_save"	Specifies what to do with the document upon completion of this activity. The available options are: Save - Save changes to the default location. If this activity is performed on an existing document, changes will be saved to its current location. If performed on a new document, changes will be saved to the location specified under the File name parameter. Save as - Save changes to the specified path and filename. Do not save changes - Changes will not be saved.
File	Text	Yes if On completion parameter is set to Save as	(Empty)	DESTINATION="c:\temp\dest.xls"	The path and filename of the file in which changes will be saved. Click the folder icon to open a standard Explorer dialog in order to navigate to the desired file or simply enter the path and filename in the provided text box.
Overwrite if workbook already exists	Yes/No	Yes if On completion parameter is set to Save as	No	OVERWRITE="YES"	If set to YES, the newly created workbook will overwrite any workbook with the same name that exists in the destination. If set to NO (default), an existing workbook with the same name will not be overwritten, however, an error will occur during runtime as a result of matching filenames. This parameter is active only if the Get document by parameter is set to Create.

Cell

Property	Type	Required	Default	Markup	Description
Select	Text (options)	Yes	Cell by reference	ACTION="rangeByReference" ACTION="cellByPosition" ACTION="rangeByReference" ACTION="rangeByPosition"	Specifies the method in which to activate the cell(s). The available options are: Cell by reference (default) - Activates a single cell specified by its cell reference, such as A1 or B3. Cell by position - Activates a single cell specified by its row and column position, such as Row 2, Column F. Range of cells by reference - Activates a range of cells specified by the cell reference for the upper left and lower right cells in the range, such as Upper left cell = A1, Lower right cell = C3. Range of cells by position - Activates a range of cells specified by the row and column positions of the upper left and lower right cells in the range (e.g.,Upper left cell row = 1, Upper left cell column = 1, Lower right cell row = 14, Lower right cell column = 3).
Cell reference	Text	Yes if selection method set to Cell by Reference	(Empty)	CELLREF="B3"	The reference of the cell to activate (e.g.,A1 or B4). This parameter is active only if the Select parameter is set to Cell by reference.
Row	Number	Yes if selection method set to Cell by position	1	CELLROW="3"	The row number of the cell to activate. This value will be used along with the value entered in the Column parameter in order to reference a specific cell. This parameter is active only if the Select parameter is set to Cell by position.
Column	Number	Yes if selection method set to Cell by position	1	CELLCOLUMN="2"	The column number of the cell to activate. This value will be used along with the value entered in the Row parameter in order to reference a specific cell. This parameter is active only if the Select parameter is set to Cell by position.
Upper left cell	Text	Yes if selection method set to Range of cells by reference	(Empty)	UPPERLEFTREF="A1"	The reference of the upper left cell in the range of cells to activate (e.g.,A1 or B4). This value will be used along with the value entered in the Lower left cell parameter in order to reference a specific cell. This parameter is active only if the Select parameter is set to Range of cells by reference.
Lower right cell	Text	Yes if selection method set to Range of cells by reference	(Empty)	LOWERRIGHTREF="C5"	Specifies the reference of the lower right cell in the range of cells to activate. This parameter is active only if the Select parameter is set to Range of cells by reference.
Upper left cell row	Number	Yes if selection method set to Range of cells by position	(Empty)	UPPERLEFTROW="1"	Specifies the row of the upper left cell in the range of cells to activate. This parameter is active only if the Select parameter is set to Range of cells by position.
Upper left cell column	Number	Yes if selection method set to Range of cells by position	(Empty)	UPPERLEFTCOLUMN="1"	Specifies the column of the upper left cell in the range of cells to activate. This parameter is active only if the Select parameter is set to Range of cells by position.
Lower right cell row	Number	Yes if selection method set to Range of cells by position	(Empty)	LOWERRIGHTROW="14"	The row of the lower right cell in the range of cells to activate. This parameter is active only if the Select parameter is set to Range of cells by position.
Lower right cell column	Number	Yes if selection method set to Range of cells by position	(Empty)	LOWERRIGHTCOLUMN="3"	The column of the lower right cell in the range of cells to activate. This parameter is active only if the Select parameter is set to Range of cells by position.

Description

Error Causes

On Error

Examples

NOTE: The sample AML code below can be copied and pasted directly into the Steps panel of the Task Builder.

Description: Activate cell "A1". Excel file "C:\temp\Employees.xls".

This help file is for the Advanced Workflow Engine v10. For other versions, please refer to http://help.globalscape.com/help/index.html

(If the Index and Contents are hidden, click the icon in the top left corner.)

If this help topic did not help you, try searching the Knowledgebase.
For the most up-to-date information, to view version history, updates, and activation instructions, visit the Support Center at http://www.globalscape.com/support-home.
For information about Globalscape, visit www.globalscape.com.

Last modified: 28-Jun-19 at 14:01:42